| Service | New Construction & Renovation Wiring |
|---|---|
| Provided by | Baer Electric Inc. — TSASK-licensed electrical contractor |
| Based in | Goodsoil, Saskatchewan |
| Service area | 8 communities across northwest Saskatchewan |
| Emergency line | 306-238-7655, 24/7 |
| Quotes | Free · answered within 24 hours |
The easiest time to get the electrical right is before the walls are closed. Once the drywall is up, moving an outlet, adding a circuit for the future hot tub or running a line for the yard light gets harder and costs more. On new builds and additions, we sit down with you or your builder early, go through the plans, and wire for how the place will actually be lived in.
A typical job runs from the service and panel through rough-in, then back after drywall for devices, fixtures and final connections. We take out the TSASK permit and make sure the rough-in is done and checked before insulation and drywall go on. Renovations work the same way, with extra care around old wiring: we tie into what's sound and replace what isn't.
Shops and garages are a big part of building out here, and they need more than a couple of outlets: welder and compressor circuits, heat, lighting, and usually a sub-panel. We also plan for what you'll want later, like an EV charger, a hot tub, a generator connection or permanent roofline lights, which we install on new builds as well as existing homes.
What we do
What's included.
- New home wiring, rough-in to final
- Additions and renovations
- Basement developments
- Garage and shop wiring
- Welder, compressor and heater circuits
- Service and panel installation
- Working to your builder's schedule
- Pre-wiring for EV chargers, hot tubs and generators
- Power planned for Gemstone permanent lights
- TSASK permits
Why Baer Electric
Local, licensed, and accountable.
-
Planned from the drawings
We go through the plans early so outlets, circuits and lighting land where you'll use them.
-
Builder-friendly
We work to your builder's schedule and keep rough-in moving so other trades aren't left waiting.
-
Permits and code
TSASK permits and the 2024 Canadian Electrical Code, enforced in Saskatchewan since June 1, 2025.
-
Shops done properly
Welders, compressors, heaters and lighting on circuits sized for them, usually from a dedicated sub-panel.
-
Ready for permanent lights
As a Gemstone dealer, we plan the outlet and control location for permanent roofline lights before the walls are closed.
How it works
What to expect.
- 01
Review the plans
We go through the drawings with you or your builder and agree on the layout.
- 02
Quote and permit
You get a written quote, and we take out the TSASK permit.
- 03
Rough-in
Service, panel, boxes and wiring go in and are checked before insulation and drywall.
- 04
Finish
After drywall we install devices and fixtures, make final connections, test everything and clean up.
Builds & renos near you.
FAQ
Questions about builds & renos.
When should I bring in the electrician on a new build?
Do you work with general contractors?
Can you wire my shop?
Can you pre-wire for things I'll add later?
Do you do renovations in older homes?
Reviews
From our customers.
Absolutely give Baer Electric a 5 Star Rating. We have had no issues with this company. Always reliable and very knowledgeable.
“Professional service with exceptional attention to detail. Blair ensures every project site is thoroughly cleaned upon completion. Highly recommend for any electrical work!”
Get a free quote within 24 hours.
Tell us what you're planning. Blair reviews every request personally and gets back to you within a day.
Quote request
Tell us about your project.