# Grain Bin & Dryer Electrical — Baer Electric

> Baer Electric wires grain bin yards in northwest Saskatchewan: aeration fans, bin heaters, grain monitoring cables, dryers and the feeds that power them. The TSASK-licensed contractor is based near Goodsoil and offers 24/7 emergency service when a fan or dryer quits during harvest.

URL: https://baerelectric.ca/services/grain-bin-wiring/
Last reviewed: 2026-10-03

A bin yard tends to grow one bin at a time. The first few each get a fan off a nearby pole, a couple more arrive a few years later, then a dryer, and suddenly the yard is carrying more load than the original service was ever planned for. Plenty of bin yards end up with wiring that works bin by bin, but nobody has looked at the whole picture.

Baer Electric handles aeration fan and heater circuits, starters and controls, grain monitoring cables, dryer and auger power, and the feeds out to the bin yard, overhead or underground. We lay the yard out so augers and trucks can move without working near overhead lines, and so adding the next bin doesn't mean starting over. Monitoring systems are wired to the manufacturer's instructions.

Harvest is the wrong time to find out a fan won't start. Late summer is a good time to have fans, heaters and connections checked before the bins fill, and our 24/7 emergency line is there for the breakdowns that happen anyway. With a frost-free season of roughly 96 days in this region, new bin-yard trenching is easiest to get done before freeze-up.

## What's included

- Aeration fan circuits and controls
- Bin heater circuits
- Grain monitoring cable wiring
- Grain dryer power
- Auger and conveyor circuits
- Bin yard feeds, overhead or underground
- Yard service and capacity checks
- Pre-harvest checks of fans and connections
- Emergency repairs during harvest

## Why Baer Electric

- **Fans, heaters and controls:** Circuits sized for the motors and heaters you actually run, with controls you can reach and understand.
- **Clear of overhead lines:** We lay out bin-yard feeds so augers and grain trucks don't have to work near overhead power lines.
- **Room for the next bin:** The feed and the panel are planned so another bin or a dryer can be added without redoing the yard.
- **24/7 at harvest:** If a fan or dryer goes down mid-harvest, call 306-238-7655 any time.
- **Underground feeds:** Trenching and wiring by the same crew, so a buried feed to the bin yard is one job.

## How it works

1. **Look at the yard:** We walk the bin yard and the service with you and talk through what you run now and what's coming.
2. **Plan and quote:** A written quote and a layout that keeps lines clear of augers and leaves room to add bins.
3. **Permit and install:** TSASK permit, then installation timed around your season, ideally before harvest or freeze-up.
4. **Test with you:** We start every fan and heater with you, label the circuits and show you how to isolate each one.

## Frequently asked questions

### Can you wire grain monitoring cables?

Yes. Monitoring cables and their controllers are wired to the manufacturer's instructions, whether you're adding to the system you already have or starting a new one.

### Why does the main trip when my fans start?

Fan motors draw a lot of current as they start, and a yard that grew bin by bin can outgrow its service or feeders. We can check the load and recommend changes, from staggering the starts to a bigger feed.

### Should the bin yard be fed overhead or underground?

It depends on the yard, but underground feeds keep lines out of the way of augers and trucks. We'll look at the distances and the ground and recommend what makes sense.

### Do you come out during harvest?

Yes. Our emergency line is answered 24/7, and harvest breakdowns are exactly what it's for. We'll give you an honest estimate of when we can be there.

### When should I have fans and heaters checked?

Late summer, before the bins fill. That leaves time to fix a bad connection or a tired motor circuit before harvest.

---
Baer Electric Inc. · 306-238-7655 · baerelectricinc@gmail.com · https://baerelectric.ca/